Design Features
The pumps used in HDSV GENiO type water pressure boosters are multistage stainless steel centrifugal pumps with vertical shaft and frequency inverter on-motor.
HDSV GENiO type water pressure boosters can be manufactured in the form of one, two, three or four pumps according to flow rate need.
Water pressure boosters can be operated automatically or manually. Water pressure boosters should be automatically operated as long as there is no compulsory case.
The set is supplied with float switch that regulates dry run protection.
During first operation of water pressure booster system, the suction collector should be filled with water and the air of the system should be released.
Usage Areas
System comprised of a Vertical Multistage Stainless Pump, on-motor inverter, a chassis, a collector and accessories
Easy mounting of the frequency inverter on the motor
Besides the compact structure of the inverter integrated into the system, its usage in smart applications
Pump inlets and outlets that are on the same axis
Water leak detection and dry run protection
Clockwise turning of the pump when viewed from the motor side
High resistance against operation without water
System control and backup with dual communication (RS485 & CAN) support
Ability to control two pumps with a single driver
Technical Specifications
Flow Range | 4x(1 – 120) m³/h |
Pressure Range | 10 – 170 m |
Speed Range | 3000 d/d |
Suction Flange Diameter | 11/4” - DN250 |
Discharge Flange Diameter | 11/4” -DN250 |
Temperature Range | 0 – 60 °C |
